Automatic Timing and Controls | ATC Digitec | DigitalPanel Meter Digitec

Digitec's Model ATC D2040 is a low-cost, short depth digital panel meter with LCD readout. The meter is powered by the current being measured and has selectable full scale input ranges of 20mA and 50mA. User adjustable scale (gain), offset and decimal point allow immediate calibration of measurement being displayed.

Model D2040 Short Depth Loop Powered Meter

31/2-Digit full-size LCD 0.6" high

Small size: 2.3" × 4.13" × 1.25"

Fits 1/8 DIN cutouts

Only 1.25" required behind the panel

Programmable decimal point

Connectors Included

Non-interactive potentiometer setup for scale (gain) and offset.

Two (2) wires for total hook-up

Made in USA

Easily scaled to desired display using potentiometers

NEMA 4X


	Data Sheet	Contact for pricing	Move Up

Model 2080 Series 4-1/2 Digit Panel Mount Indicator/Totalizer

The ATC 2080 is a loop powered indicator that measures, displays and totalizes the current in a 4-20 MA circuit. Although the instrument is loop powered, it only produces <3.5 V drop allowing it to be used in series with almost any 4-20 MA application. Modular accessories enable the user to select the lowest cost configuration while retaining full interchangeability between instruments.

Backlighting is available as an option to improve readability when the 2080 is installed in a poorly illuminated area. Backlighting is powered by a separate external 24 V DC supply.

Optional high alarms provide two isolated open drain outputs which may be independently programmed with a high trip point. When an alarm is tripped, the alarm and current reading alternate on the indicator.

NEMA 4X Front Panel

1/8 DIN Anodized Aluminum Case

Short Depth Case ( 2-1/4")

2 Isolated Open Drain Alarm Outputs

Optional Display Backlight for Low-Lighting Applications

Square Root Extractions


	Data Sheet	Contact for pricing	Move Up

Model 2090 Series NEMA 4X, 3-1/2 Digit Loop Powered Indicator in NEMA 4X Enclosure

The ATC 2090 3½ Digit, loop-powered indicator is perfect for process applications where no power is available, a NEMA 4X enclosure is needed and cost is a consideration.
Designed for easy installation, the two wire connection is all that is required to power and operate the unit. The 2090 can be wall or panel mounted.

NEMA 4X Enclosure

Easy Calibration and Installation

4-20 MA or 10-50 MA inputs


	Data Sheet	Contact for pricing	Move Up

Model 2095 Series NEMA 4X, 4-1/2 Digit Loop Powered Indicator in NEMA 4X Enclosure

The ATC 2095 4½ Digit, loop-powered indicator is perfect for process applications where no power is available, and a NEMA 4X enclosure is needed. Designed for easy installation, the two wire connection is all that is required to power and operate the unit. The 2095 can be wall or panel mounted. Optional display backlighting and two isolated open drain alarms add functionality on an as-needed basis (backlighting is powered by an external 24 V DC supply).

NEMA 4X Enclosure

Easy Calibration and Installation

4-20 MA Loop-Powered

Optional alarm outputs and backlighting

Automatic Timing and Controls| industrial timers | industrial relays | industrial electronic controllers | Sensors


	Data Sheet	Contact for pricing	Move Up

Model 2800 Series Digital Panel Meter

Microprocessor technology provides application versatility and excellent accuracy at an affordable price

Standard features include:

Fully prompted setup and data entry through front panel keypad

Automatic storage of max/min measurement data

Dual high/low set points with user-programmable hysteresis

Self Cal™ insures accuracy by sampling a precision internal reference every four seconds

Set-up data permanently stored in non-volatile memory

Lockout code for added security

High-intensity 0.5” blue-green vacuum fluorescent display

NEMA 12 sealed front panel

Compact 1/8 DIN case, 45mm x 92mm cutout

Input/Output connectors supplied

Dimensions: 2” (50.8mm) H x 3.83” (97.3mm) W x 5.36” (136.1mm) D


	Data Sheet	Contact for pricing	Move Up

Model D3100 Series Panel Instrumentation

The ATC D3100 Series is a low priced family of digital panel meters for industrial or laboratory measurement. These meters are standard with scaling, relay outputs, analog output, excitation and screw terminal connectors. Meter display is a ±1,999 count or ±19,999 count resolution LED display. This family of meters can measure all common transducer outputs. There are seven models from which to choose.

Bright LED Display

Two Relay Outputs

4 - 20mA or 0 - 10V Analog Output

Standard 1/8 DIN Cutout

Screw Terminal Connectors

Scalable

Seven Models to Choose From:
Voltage / Current
Process
Thermocouple (J & K)
R TD
Strain Gauge
True AC R MS Voltage/Current
AC Average Voltage / Current

All models are CE Approved

Automatic Timing and Controls| industrial timers | industrial relays | industrial electronic controllers | Sensors


	Data Sheet	Contact for pricing	Move Up

Model D3200 Voyager Series

5 digit, -19999 to +20999 red LED display

Display can be user programmed for 3½, 4 or 4½ digits

Microprocessor controlled A/D

Four front panel annunciators to display alarm status or status indicators for selectable functions

Universally powered from 100 to 132VAC, 200-264VAC and 10 to 40VDC

No calculation setup for scaling and offsetting. Simply enter input and display high and low values

Display format selection of:
- decimal point
- count by 1, 2, 5 or 10
- least significant “dummy” zero
- 3½, 4 or 4½ digit display

Selection for upper and lower limits that when exceeded will cause display to flash

Programmable A/D functions of:
- Update time from 10 per second to once every 20 seconds
- Averaging of programmable 1 to 25 input reading by walking window means
- Programmable window of measurements that can be allowed in the averaging function

User configurable non-linear 17 point correction

User programmable front keys and external input assignments.

Programmable alarm functions include:
- Each alarm programmable as:
Off
High alarm
Low alarm
Descending alarm
Deviation high alarm
Deviation low alarm
- Each alarm output is programmable for:
1. Normally open/normally closed
2. On delay – specifies minimum time alarm condition must be true before output is activated
3. Off delay – specifies minimum time alarm condition must be false before output is de-activated
- Full range programmable hystersis
- Latching operation
- Outputs may be assigned to input, net, peak #1 or peak #2
- Fail safe operation
- Alarm limits directly accessible from front panel

Max./min. peak detectors with capture delay (signal must be valid for this programmable amount of time to become a valid peak)

Second scale factor allows change of display to different engineering units. Typically English to Metric conversions

CE Approved

Password function allows lockout of access to programming functions without knowing programmed pass number

Quick zero and span adjustment from front pane

Excitation power supply

Slot on inside of front panel for displaying units of measure from furnished decal sheet

1/8 DIN cutout

Dimensions of 3.62" (92mm) wide by 1.73" (44mm) tall by 4.5" (114.5mm) long

NEMA 12 rated front panel

Screw terminal connectors

Operating temperatures of –10 to +60°C

Accuracy: .01%


	Data Sheet	Contact for pricing	Move Up

Model D3300 Series Digital Panel Meter

The ATC D3300 Series is a compliment to the D3100 Series with the D3300 being a basic display meter without relay or analog outputs. All other features, size, specifications, etc. are the same as the corresponding D3100 meter. See D3100 for specifications, feature and options.


	Data Sheet	Contact for pricing	Move Up

Model D3400 Series

Largest LED Display Available with .8'' high characters in a 1/8 DIN Panel Meter Package. Available in seven (7) different input models. Also with space savings compared to other panel meters with 2.4'' behind the panel.

3½ digit full-size LED, 0.56" high

Small size 1.9" x 4" x 1.115"

Only 0.5" required behind the panel


	Data Sheet	Contact for pricing	Move Up

Model D3700 Series Panel Instrumentation

NEMA 4X. The ATC D3700 series digital panel meters are the most versatile and powerful meters on the market. Available as either single or dual channel. It is the perfect choice for the most demanding applications.

NEMA 4X rated front

6 digit red LED display

Peak Capture model (-02) is 10,000 readings/sec. capture rate

60/sec. Update Rate

Integrating Totalizer

20 point linearization

Tare gross/net operation

Dual scale setup (English/Metric)

18VDC 50mA excitation supply

Math channel

1/8DIN extruded aluminum case

Shunt calibration

No calibration scaling

Calibrated load scaling

User definable defaults

User Programmable keys and remote inputs

Relay for alarm/shunt calibration


	Data Sheet	Contact for pricing	Move Up

Model D3900 Series Four Channel Analog Panel Meter with 5th Math Channel

The ATC D3924 series digital panel meters are the most versatile and powerful meters on the market. The meter's 6 digit display, high speed measurement (20/sec. update rate) makes this the perfect choice for those most demanding applications. The D3900 also includes 4 assignable front keys, 2 assignable remote inputs and a variety of menu lockout features. Combine all this with its good looks, industrialized aluminum case, NEMA 4X construction, 13 indicating LEDs, and snap-action buttons.

6 digit red LED display

20/sec. Update Rate

Tare gross/net operation

Dual scale setup (English/Metric)

Math channel

1/8 DIN extruded aluminum case

NEMA 4X rated front

Shunt calibration

No calculation scaling

Calibrated load scaling

User programmable keys and remote inputs

Relay for alarm/shunt calibration

Scan Mode (Selectable Scanning)


	Data Sheet	Contact for pricing	Move Up

Model D5228/D5248/D5249 Series

DigiTec's Marquee Displays are an economic solution to problems involving communication with workers at a distance. They can be used to display safety alerts, machine status, production counts and similar messages. They are S2 compatible devices that can operate with personal and single board computers, as well as Basic or ASCII modules of programmable controllers.

Viewing Range of 125 feet for 2" tall characters, up to 275 feet for 4.5" characters

Message options include blinking, horizontal and vertical scrolling and embedded variable data

Universal Mounting Brackets allow top, surface or suspended mounting

Units can be stacked together or mounted back to back for bi-directional viewing

Communicates using our S2 Protocol via optically isolated RS232 or RS422 ports

5A, SPDT Relay Alarm Output can be used to sound siren or strobe light


	Data Sheet	Contact for pricing	Move Up

Model D3600 Low Profile Digital Panel Meter

The DigiTec ATC D3600 Series of Low Profile Digital Panel Meters are the new 3/64 DIN compact size ideal solution for meeting the measurement and display requirements of industrial applications, OEM’s and system designers.